A coat of epoxy paint could be just the thing to give the concrete floor of your garage a long-lasting and glamorous finish of tough resin that will make your garage more a part of your home and less an area where old spanners go to die. Epoxy paint comes in a range of vivid colours and will be resistant to oil, grease and the kinds of solvents that get spilled in garages.
Always Be Prepared
Before you apply the paint, you need to assess the condition of your garage floor. Thorough cleaning is required to make sure the concrete can receive paint in an even fashion for a smooth finish. First, clean all oil spots, scrub the floor and then etch it with a mild acid. Plenty of scrubbing and rinsing will be needed to get that concrete really clean. For tips on removing oil stains from the floor, see this report from The Telegraph. You may want to consider hiring a power scrubber with brush attachments to make the cleaning easier.
After the floor is spotless, you need to address any cracks or holes and fill them with a suitable material. You also need to check if the floor is dry. Do this by taping a plastic bag to the floor for 24 hours. When you lift it up, it will hopefully dry underneath, which means you are ready to apply the epoxy paint. You will need to choose either a water- or solvent-based epoxy that is mixed just before application. This is best done when the weather is warm for curing and drying the floor. Ventilation is also important when using potentially hazardous solvents.
Obviously, you will need to get everything off the floor when working on it, and efficient garage shelving will help greatly here. If you want to look into the storage and organisation possibilities of garage shelving, it would be useful to contact experts in this area such as https://www.garage-shelving.co.uk/, who can guide you through the full range of options available.
After the first coat dries, a second coat will complete the job. Before you start, make sure you have protective clothing and gloves, and respirators may be needed if working with acids to clean the floor or a solvent-based epoxy.