Reviews February 20, 2019 Sharara No comments

How To Clean And Revive An Old Wood Fence

One of the benefits of having a wood fence is that you very rarely reach a point where your materials need to be totally replaced. While it might not be difficult to clean a wood fence, many homeowners find themselves letting this task slip, resulting in a dirty, worn-down fence that looks far from brand new. Luckily, there’s an easy way to spruce up any old fence without spending lots of time and money on the project. If you use a Fence Staining Londonberry facility, you’re already investing in a better, brighter look for your fence. If you want to take a DIY approach, here’s what you should do.

Clean

Before you do anything, you’re going to have to make sure your fence is as clean as it can be. If you’re working with a smaller damaged area, you might be able to do this using only a few tools over the course of an afternoon. For larger fences or seriously dirty or damaged areas, however, it might take something a bit more powerful. Consider hiring a pressure washing company to help clean off your fence before starting work on the restoration. If you have previous experience with power washing, you could take on the job yourself, as long as you’re extremely careful and start on a low setting. There’s no point in putting a new stain over a dirty fence, and cleaning it off will allow you get a better look at what parts are dealing with severe damage and what parts just need a bit of sanding.

Treat

Once you’ve cleaned, it’s time to treat. Now that your fence is fully washed off, you can get a sense of what condition your wood is in. If you’re seeing signs of mold or mildew even after your pressure washing session, figure out whether you can sand off the damaged parts or if you need to completely replace a few pieces of wood. After everything is in the best condition it can possibly be, it’s time to start prepping your wood for staining.

Condition

Before you apply your stain, you’ll want to add a layer of wood conditioner. This substance is exactly what it sounds like. Before you add a new layer of stain or paint, it’s important to have your wood primed and ready. A wood conditioner helps make sure your wood is as healthy and strong as it can be before you apply a shiny new coat of stain. While you can technically go without it, it’s a simple extra step to take on if you want your fence’s makeover to look better for longer.

Stain

Finally, you can apply your stain. Most wood stains range from golden amber hues to darker mahogany and cherry shades. The color of your stain is up to you, but it’s generally a good idea to work with the natural color of the wood rather than trying to apply a stain that’s conspicuously lighter or darker. Apply two even coats, and let dry. Once everything is set, you’ll be looking at a fence that looks brand-new and almost completely blemish-free.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.